PFAFF 5/8" Quilt Binder
This Pfaff quilt binder 15mm attachment is perfect for attaching binding to your quilt projects.
The quilt binder has a large opening to accommodate the quilt layers and creates a finished binding size of 5/8" (15mm).
Fits J L
*Compatible when used with Stitch Plate 412964309:
creative sensation pro 2, pro
creative sensation
creative vision
creative 4.5, 4.0, 3.0, 2.0
creative performance
performance 5.2, 5.0
quilt expression 4.2, 4.0
expression 3.5, 3.2, 3.0, 2.0, 150
1. Attach the Quilt Binder Foot and engage the IDT. Set the machine for straight stitch or hand look quilt stitch. Place the attachment plate on the stitch plate of the machine. Align pin on the back of attachment plate to the top opening on the stitch plate of the machine. Screw the attachment plate in place with one thumb screw.
2. Place the binder on the attachment plate.
3. Adjust the binder into place and attach it with the two thumb screws and washers.
4. Measure the length of your project and add at least 6” (15cm). Cut enough 1 3/4” (45mm) strips to equal that number and join the strips together.
5. Place the pointed edge of the fabric strip in the metal guide. Using tweezers, slide the fabric
strip into the binder with the wrong side facing you.
6. When the fabric is through the end of the binder, hold the folded strip with your left hand and continue to feed it into the binder while the fabric forms a doublefold tape.
7. Raise the presser foot and pull the strip under the foot and straight back 2.5” (5-6cm) behind the needle.
8. Adjust the stitch position to right or left to reach the desired needle position. Test sew a sample before sewing your project.
